Digital Audio - Raritan dominion kx III Administrator's Manual

Chapter 7: Virtual KVM Client (VKC and VKCs) Help

Digital Audio

306
The KX III supports end-to-end, bidirectional, digital audio connections
for digital audio playback and capture devices from a remote client to a
target server.
The audio devices are accessed over a USB connection.
Current device firmware is required.
One of the following CIMs must be used:

D2CIM-DVUSB

D2CIM-DVUSB-DVI

D2CIM-DVUSB-HDMI

D2CIM-DVUSB-DP
® ®
Windows , Linux and Mac
VKCS, and AKC support connections to audio devices.
Note: Audio CDs are not supported by virtual media so they do not work
with the audio feature.
Before you begin using the audio feature, Raritan recommends you
review the audio related information documented in the following
sections of Help:

Supported Audio Device Formats

Recommendations for Dual Port Video

Dual Video Port Group Supported Mouse Modes

CIMs Required for Dual Video Support

Informational Notes,
Supported Audio Device Formats
The KX III supports one playback and capture device and one record
device on a target at a time. The following audio device formats are
supported:

Stereo, 16 bit, 44.1K

Mono, 16 bit, 44.1K

Stereo, 16 bit, 22.05K

Mono, 16 bit, 22.05K

Stereo, 16 bit, 11.025K

Mono, 16 bit, 11.025K
®
operating systems are supported. VKC,
(on page 306)
(on page 241)
(on page 242)
Audio (on page 415)
(on page 241)