Raritan dominion kx III Administrator's Manual page 259

Chapter 4: KX III Administration
7. Enter your username and password, then click Login.
8. Accept the user agreement (if applicable).
9. If security warnings appear, accept and/or allow access.
Step 3: Configure the Mouse Mode and Ports
Once you have connected the target server to the Raritan device through
the target server video ports, it detects the connection and displays the
ports on the Port Configuration page.
For instructions, see Configuring Standard Target Servers (on page
103)
After the ports are configured, they can be grouped in a dual video port
group.
Note: Existing ports do not have to be configured if you have already
done so when creating dual port video groups. See Creating a Dual
Video Port Group (on page 190)
Configure the target server mouse mode after you connect to the target.
See Dual Video Port Group Supported Mouse Modes (on page 241)
Step 4: Create the Dual Video Port Group
See Creating a Dual Video Port Group (on page 190)
247