Raritan dominion kx III Administrator's Manual page 156

Chapter 4: KX III Administration
144
Configure the Local Port Scan Mode Settings
1. If needed, configure the Local Port Scan Mode settings. These
settings apply to Scan Settings feature, which is accessed from the
Port page.

In the "Display Interval (10-255 sec):" field, specify the number of
seconds you want the target that is in focus to display in the
center of the Port Scan window.

In the "Interval Between Ports (10 - 255 sec):" field, specify the
interval at which the device should pause between ports.
Select the Local Console Keyboard Type
1. Choose the appropriate keyboard type from among the options in the
drop-down list.
The browser will be restarted when this change is made.