Raritan dominion kx III Administrator's Manual page 174

Chapter 4: KX III Administration
162
USB Connection
Use either a Micro A or Micro B to USB Type A cable to connect the
Sierra Wireless to the KX III.

Connect the Sierra Wireless USB port to any of the three USB ports
on back of the KX III or to the USB port on the front of the KX III.
Note: Only USB connections are supported.
Configure the Sierra Wireless Modem
Following are steps to configure the Sierra Wireless modem for use with
KX III using these connections.
These settings are configured on the Sierra Wireless modem, not KX III.
Configure the Sierra Wireless Modem for a Cellular Connection

A SIM card must be purchased from your service provider and
installed in the Sierra Wireless modem.

Get a static IP address from our service provider, then assign it to
the Sierra Wireless modem.

Sierra Wireless must be configured for Public mode.

Host Connection Mode must be set to "USB Uses Public IP".

USB Device Mode must be set to "USBNET".
Change Default Username
For security reasons, Raritan recommends you change the default
Admin account username to a new name before using the Sierra
Wireless .
Assign User Groups Modem Access Permissions