Raritan dominion kx III Administrator's Manual page 169

2. Launch Internet Explorer
Certificate Error message will be displayed.
3. Select View Certificates.
4. On the General tab, click Install Certificate. The certificate is then
installed in the Trusted Root Certification Authorities store.
5. After the certificate is installed, the KX III IP address should be
removed from the Trusted Site zone.
To enable AKC download server certificate validation:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. Select the Enable AKC Download Server Certificate Validation
checkbox or you can leave the feature disabled (default).
3. Click OK.
If you are connecting to a KX III standalone device and support for AKC
download server certificate validation is enabled, the valid IPv6 format to
generate the certificate is either:

CN =[fd07:02fa:6cff:2500:020d:5dff:fe00:01c0] when
there is a leading 0
or

CN =[fd07:02fa:6cff:2500:020d:5dff:0000:01c0] when
there is no zero compression
Enable Standalone VKC Download Server Certificate Validation
On the Services page select the "Enable Standalone VKC Download
Server Certificate Validation" checkbox to use HTTPS for download the
VKCs application. JRE will perform a check to ensure the server
certificate matches the designated device. If the certification does not
match, a security warning message displays to give you the option to
continue. Best practice for using VKCs is to select this option, and install
a valid certificate on KX III.
When this option is not selected, the VKCs certificate is not validated.
Chapter 4: KX III Administration
®
using the KX III IP address as the URL. A
157