Upgrading The Kx Iii Firmware - Raritan dominion kx III Administrator's Manual

Chapter 4: KX III Administration
218
4. Click OK to continue the upgrade. Progress bars are displayed
during the upgrade. Upgrading takes approximately 2 minutes or less
per CIM.

Upgrading the KX III Firmware

Use the Firmware Upgrade page to upgrade the firmware for your KX III
and all attached CIMs. This page is available in the KX III Remote
Console only.
Firmware Upgrade
Important: Do not turn off your KX III appliance or disconnect CIMs while
the upgrade is in progress - doing so will likely result in damage to the
appliance or CIMs.
To upgrade your KX III appliance:
1. Click the Show Latest Firmware link to locate the appropriate Raritan
firmware distribution file (*.RFP) on the
http://www.raritan.com
2. Unzip the file. Please read all instructions included in the firmware
ZIP files carefully before upgrading.
Note: Copy the firmware update file to a local PC before uploading.
Do not load the file from a network drive.
3. Choose Maintenance > Firmware Upgrade. The Firmware Upgrade
page opens.
4. Click Browse to navigate to the directory where you unzipped the
upgrade file.
5. Click Upload from the Firmware Upgrade page.
Information about the upgrade and version numbers is displayed for
your confirmation (if you opted to review CIM information, that
information is displayed as well).
Raritan website
on the Firmware Upgrades web page.