Power Supply Setup - Raritan dominion kx III Administrator's Manual

Power Supply Setup

KX III provides dual power supplies, and can automatically detect and
provide notification regarding the status of these power supplies.
When both power supplies are used, KX III automatically detects them
and notifies you of their status. Additionally, both the Powerln1 and
Powerln2 Auto Detect checkboxes are automatically selected on the
Power Supply Setup page.
If you are using only one power supply, you can enable automatic
detection for only the power supply in use.
Proper configuration of power supplies ensures KX III sends the
appropriate notifications should a power supply fail. For example, if
power supply number one fails, the power LED at the front of the unit will
turn red.
The Power LED on the front of the KX III appliance is red when the
checkbox is selected for an unconnected power supply. The LED is blue
when the checkbox is not selected for an unconnected power supply.
To enable automatic detection for the power supplies in use:
1. Choose Device Settings > Power Supply Setup. The Power Supply
Setup page opens.
Chapter 4: KX III Administration
181