Raritan dominion kx III Administrator's Manual page 190

Chapter 4: KX III Administration
178
It is important that the SMTP server information be accurate so that the
KX III appliance can send messages using that SMTP server.
This test sends an email using the settings displayed on the page in the
SMTP Settings pane. KX III saves the settings once you click Apply.
1. Send a test email by entering a destination email address to receive
the test message
Note that the receiver email is not saved.
2. Verify the message was received by the intended email target. If
there are problems, contact your SMTP administrator to make sure
your SMTP server IP address and authorization information are
correct.
Viewing the KX III MIB
1. Choose Device Settings > Event Management - Settings. The Event
Management - Settings page opens.