Raritan dominion kx III Administrator's Manual page 105

3. Ensure the "Enable Automatic Failover" checkbox is not selected.
4. If needed, manually specify the network parameters by entering the
Default Gateway and then complete the steps that follow.
Alternatively, if you do not want to set a static IP, see Disable or
Enable DHCP in KX III.
5. Enter the IP address you want to use to connect to the KX III LAN1.
The default IP address is 192.168.0.192.
6. Enter the IPv4 Subnet Mask. The default subnet mask is
255.255.255.0.
7. In the LAN2 IPv4 section, set the IP Auto Configuration to None.
8. Enter the IP address you want to use to connect to the KX III LAN2.
Chapter 4: KX III Administration
93