Raritan dominion kx III Administrator's Manual page 155

Configuring KX III Local Port Settings
Note: Some changes you make to the settings on the Local Port Settings
page restart the browser you are working in. If a browser restart occurs
when a setting is changed, it is noted in the steps provided here.
To configure the local port settings:

Choose Device Settings > Local Port Settings. The Local Port
Settings page opens.
Enable Standard Local Port
1. Select the checkbox next to the Enable Standard Local Port to
enable it. Deselect the checkbox to disable it.
By default, the standard local port is enabled but can be disabled as
needed.
The browser is restarted when this change is made.
Note: If you are using the tiering feature, the Standard Local Port
feature will be turned off since both features cannot be used at the
same time.
Enable Local Port Device Tiering
1. If you are using the tiering feature, select the Enable Local Port
Device Tiering checkbox and enter the tiered secret word in the Tier
Secret field.
In order to configure tiering, you must also configure the base device
on the Device Services page.
See Configuring and Enabling Tiering
information on tiering.
Chapter 4: KX III Administration
(on page 149) for more
143