Recommendations For Audio Connections When Pc Share Mode Is Enabled - Raritan dominion kx III Administrator's Manual

Chapter 7: Virtual KVM Client (VKC and VKCs) Help
308
Recommendations for Audio Connections when PC Share Mode is
Enabled
If you are using the audio feature while running PC Share mode, audio
playback and capture are interrupted if an additional audio device is
connected to the target.
For example, User A connects a playback device to Target1 and runs an
audio playback application then User B connects a capture device to the
same target. User A's playback session is interrupted and the audio
application may need to be restarted.
The interruption occurs because the USB device needs to be
re-enumerated with the new device configuration.
It may take some time for the target to install a driver for the new device.
Audio applications may stop playback completely, go to the next track, or
just continue playing.
The exact behavior is dependent on how the audio application is
designed to handle a disconnect/reconnect event.
Bandwidth Requirements
The table below details the audio playback and capture bandwidth
requirements to transport audio under each of the selected formats.
Audio format
44.1 KHz, 16bit stereo
44.1 KHz, 16bit mono
2.05 KHz, 16bit stereo
22.05 KHz, 16bit mono
11.025 KHz, 16bit stereo
11.025 KHz, 16bit mono
Network bandwidth requirement
176 KB/s
88.2 KB/s
88.2 KB/s
44.1 KB/s
44.1 KB/s
Audio 22.05 KB/s