Raritan dominion kx III Administrator's Manual page 49

A: AC Power
1. Use the power cords that came with KX III. Use both cords with AC
power outlets for dual-power failover protection.
Optional For details on enabling power supply autodetection from the
Remote Console, see Specify Power Supply Autodetection in online
help.
LED Statuses During KX III Boot Up
When you boot up the KX III, the LED lights behave as follows:

When first powered up:

All Channel LEDs are on

The Power LED is off

At the boot phase:

All Channel LEDs are off

If both power supplies are on, the Power LED is Blue

If one power supply is on, the Power LED is Red
Chapter 4: KX III Administration
37