Raritan dominion kx III Administrator's Manual page 116

Chapter 4: KX III Administration
104
6. Click OK.
Configuring KVM Switches
The KX III also supports use of hot key sequences to switch between
targets on a KVM switch. KVM switching is supported by blade chassis
and in tiered configurations.
Important: For user groups to see the KVM switch that you create, you
must first create the switch and then create the group. If an existing
user group needs to see the KVM switch you are creating, you must
recreate the user group.
To configure KVM switches:
1. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
2. Click the Port Name of the target server you want to rename. The
Port Page opens.
3. Select KVM Switch.
4. Select the KVM Switch Model.
Note: Only one switch will appear in the drop-down.
5. Select the KVM Switch Hot Key Sequence.
6. Enter the Maximum Number of Target Ports (2-32).