Smart Cards - Raritan dominion kx III Administrator's Manual

Smart Cards

Using the KX III, you are able to mount a smart card reader onto a target
server to support smart card authentication and related applications.
For a list of supported smart cards, smart card readers, and additional
system requirements, see
Requirements, CIMs and Supported/Unsupported Smart Card
Readers (on page 303).
Note: The USB Smart Card token (eToken NG-OTP) is only supported
from the remote client.
Smart card reader mounting is also supported from the Local Console.
See Local Console Smart Card Access
Dominion device help.
Smart Card Minimum System Requirements, CIMs and
Supported/Unsupported Smart Card Readers
Before you begin using a smart card reader, review the following:

Smart Card Minimum System Requirements

Supported Computer Interface Module (CIMs) Specifications
page 379)

Supported and Unsupported Smart Card Readers
Authentication When Accessing a Smart Card Reader
When accessing a server remotely, you can select an attached smart
card reader and mount it onto the server.
Smart card authentication is used with the target server, it is not used to
log into the device. Therefore, changes to smart card PIN and
credentials do not require updates to device accounts.
PC Share Mode and Privacy Settings when Using Smart Cards
When PC-Share mode is enabled on the device, multiple users can
share access to a target server.
However, when a smart card reader is connected to a target, the device
will enforce privacy regardless of the PC-Share mode setting.
In addition, if you join a shared session on a target server, the smart card
reader mounting will be disabled until exclusive access to the target
server becomes available.
Chapter 7: Virtual KVM Client (VKC and VKCs) Help
Smart Card Minimum System
(on page 349) in your
(on page 385)
(on
303