Build Data And Power Circuits For The Kx Iii - Raritan dominion kx III Administrator's Manual

Build Data and Power Circuits for the KX III

Submit an Add Item Request for the KX III
Manage the KX III Work Order
Note that entire cabinets, along with the items in the cabinet and their
connections and child devices, can also be cloned.
So if you added a KX III to a cabinet and use the same cabinet
configuration throughout your data center, you can clone the cabinet.
See Creating New Items and Cabinets Using Cloning in dcTrack
Help.
Once the KX III exists in dcTrack
Circuits can be created when you add the KX III, or at a later time.
After the circuits are created, issue a request to create them in the data
center.
See Building New Circuits for Items in dcTrack Help.
Once you have added a KX III to dcTrack
Request.
The request sets off the change control process, beginning with a work
order to physically install the KX III in the data center.
See Submit an Install Item Request from the Action Menu in dcTrack
Help.
Unless Request Bypass mode is enabled, in which case dcTrack
not manage the change control process an item request moves through,
the work order to install the KX III is managed by the dcTrack
Gatekeeper.
See Managing Work Orders or Request Bypass in dcTrack Help.
Appendix C: Managing KX III in dcTrack
®
, create data and power circuits for it.
®
, submit an Install Item
® does
369