Raritan dominion kx III Administrator's Manual page 163

Steps
KX III Base device
KX III Tiered device
CIM to connect the target server to KX III the Tiered device.
Target server
Base device Tier port to Tiered device Tier port connection:
 Connect one end of a Cat5/5e/6 cable into a target server port on the KX
III Base device.
 Connect the other end of the cable into the Tier port on the KX III Tiered
device.
Tiered device connection to the target server keyboard/video/mouse ports:
 Connect one end of a Cat5/5e/6 cable into a target server port on the KX
III Tiered device, and the other end into a supported CIM such as the
D2CIM-DVUSB.
 Connect the keyboard, mouse and video plugs on the CIM to the
corresponding ports on the target server.
Enabling Tiering
From the base KX III tier device, select Device
1
Settings > Device Services to open the Device
Service Settings page.
Select Enable Tiering as Base.
In the Base Secret field, enter the secret shared
3
between the base and the tiered devices. This
secret is required for the tiered devices to
authenticate the base device. Enter the same
secret word for the tiered device. Click OK.
Enable the tiered devices. From the tiered
4
device, choose Device Settings > Local Port
Settings.
In the Enable Local Ports section of the page,
select Enable Local Port Device Tiering.
Chapter 4: KX III Administration
151