Raritan dominion kx III Administrator's Manual page 79

their own. Carefully consider granting these permissions.
Permission Description
Device Access Allows users and user groups with this
While Under permission to directly access the KX III. The KX
CC-SG III is accessed using an IP address when Local
Management Access is enabled for the device in CC-SG.
The device can be accessed from the
VKC/VKCs and AKC.
When a device is accessed directly while it is
under CC-SG management, access and
connection activity is logged on the KX III. User
authentication is performed based on KX III
authentication settings.
Note: The Admin user group has all
permissions by default.
Device Settings Network settings, date/time settings, port
configuration (channel names, power
associations), event management (SNMP,
Syslog), virtual media file server setups.
Diagnostics Network interface status, network statistics,
ping host, trace route to host, KX III
diagnostics.
Maintenance Backup and restore database, firmware
upgrade, factory reset, reboot.
Modem Permission to use the modem to connect to the
KX III device.
PC-Share Simultaneous access to the same target by
multiple users.
If you are using a tiered configuration in which
a base KX III device is used to access multiple,
additional tiered devices, all devices must
share the same PC-Share setting.
Security SSL certificate, security settings (VM Share,
PC-Share), IP ACL.
User User and group management, remote,
Management authentication (LDAP/LDAPS/RADIUS), login
settings.
If you are using a tiered configuration in which
a base KX III device is used to access multiple
other tiered devices, user, user group and
remote authentication settings must be
Chapter 4: KX III Administration
67