Raritan dominion kx III Administrator's Manual page 210

Chapter 4: KX III Administration
198
Encryption & Share
Using the Encryption & Share settings you can specify the type of
encryption used, PC and VM share modes, and the type of reset
performed when the KX III Reset button is pressed.
WARNING: If you select an encryption mode that is not supported by
your browser, you will not be able to access the KX III from your
browser.
Note that video performance may be impacted once encryption is applied.
The extent of the performance impact varies based on the encryption
mode.
For the best possible video performance and throughput, disable
encryption mode to KVM and Virtual Media if your security policy permits
this.
To configure encryption and share:
1. Choose one of the options from the Encryption Mode drop-down list.
When an encryption mode is selected, a warning appears, stating
that if your browser does not support the selected mode, you will not
be able to connect to the KX III.
The warning states "When the Encryption Mode is specified please
ensure that your browser supports this encryption mode; otherwise
you will not be able to connect to the KX III."