Raritan dominion kx III Administrator's Manual page 147

Supported Blade Chassis Models
This table contains the blade chassis models that are supported by the
KX III and the corresponding profiles that should be selected per chassis
model when configuring them in the KX III application. A list of these
models can be selected on the Port Configuration page from the Blade
Server Chassis Model drop-down, which appears when the Blade
Chassis radio button is selected. For details on how to configure each
blade chassis model, see their corresponding topics in this section of the
help.
Blade chassis model
®
Cisco UCS
® ™
Dell PowerEdge
1855/1955
Dell PowerEdge M1000e
IBM ® BladeCenter ® S
IBM BladeCenter H
IBM BladeCenter T
IBM BladeCenter HT
IBM BladeCenter E
®
HP
Supported CIMs for Blade Chassis
The following CIMs are supported for blade chassis being managed
through the KX III:

DCIM-PS2

DCIM-USBG2

D2CIM-VUSB

D2CIM-DVUSB
Following is a table containing supported CIMs for each blade chassis
model that the KX III supports.
Chapter 4: KX III Administration
KX III Profile
Configure using Port Group
Management functions. See
Cisco UCS Blade Chassis
Configuration (Port Group
Management) (on page 133)
Dell PowerEdge 1855/1955
Dell PowerEdge M1000e
IBM (Other)
IBM BladeCenter H
IBM (Other)
IBM (Other)
IBM BladeCenter E
Configure using Port Group
Management functions. See
Cisco UCS Blade Chassis
Configuration (Port Group
Management) (on page 133)
HP and
HP and
135