Raritan dominion kx III Administrator's Manual page 120

Chapter 4: KX III Administration
108
3. For digital CIMs, to set the target's video resolution to match your
monitor's native display resolution, select the resolution from the
Display Native Resolution drop-down.
For a complete list of supported video resolutions from the remote
console, see KX III Supported Local Port DVI Resolutions
page 378)
4. If you are using an HDMI CIM, some operating system/video card
combinations may offer a limited range of RGB values. Improve the
colors by selecting the DVI Compatibility Mode checkbox under the
Target Settings section.
Apply Selected Profiles to Other CIMs
1. Apply the profile to other CIMs by selecting them from the list in the
Apply Selected Profiles to Other Ports section of the Port
Configuration page.
(on