Loading New Device Firmware Onto Cc-Sg; Updating The Paragon Ii System Controller; Figure 3 Selecting New Firmware To Upload To Cc-Sg - Raritan Paragon II Deployment Manual

6

Loading New Device Firmware onto CC-SG

Loading CommandCenter Secure Gateway's Firmware Manager with firmware updates allows it
to update devices under its management. This includes the Paragon II, P2SC, UST-IP and IP-
Reach units in a PCCI setup.
Important: Check the Compatibility Matrix on the Raritan website to make
sure the new device firmware version is compatible with your CC-SG firmware
version. If you need to upgrade both CC-SG and a device or group of devices,
perform the CC-SG upgrade first, and then perform the device upgrade.
1. Download the latest device firmware file from Raritan website (http://www.raritan.com) to
your client PC.
2. Launch CommandCenter Secure Gateway. On the Administration menu,, click Firmware
Manager. The Firmware Manager screen appears.
3. Click Add to add a new firmware file. A search window appears.
4. Click on the Look In drop-down arrow and navigate to locate the firmware file in your
system. When you find the firmware, select it, and click Open. The firmware name will
appear in the Firmware Name field of the Firmware Manager.
5. Click Close to close the Firmware Manager screen.
Follow this process to upload the latest firmware for the Paragon II, Paragon II System Controller,
UST-IP and IP-Reach devices.

Updating the Paragon II System Controller

Once the device firmware is loaded into CommandCenter Secure Gateway, CC-SG can update
your Paragon II System Controller.
1. Click on the Devices tab and select a P2SC device from the Devices tree.
2. On the Devices menu, click Device Manager, and then click Upgrade Device. The Upgrade
Device screen appears.
3. Click on the Firmware Name drop-down arrow and select the appropriate firmware from the
list (Raritan or your reseller will provide this information).
4. Click OK to upgrade the device or Cancel to close the Upgrade Device screen.
5. If the firmware version of the device is not compatible with CC-SG, a message will alert you
and ask if you want to proceed. Click Yes to upgrade the device, or No to cancel the
operation.
6. A Restart message appears; click Yes to restart the device or No to close the window
without restarting.
P II / C C
ARAGON OMMAND

Figure 3 Selecting New Firmware to Upload to CC-SG

I S
ENTER NTEGRATION OLUTIONS
D G
EPLOYMENT UIDE