Digital Cim Timing Modes - Raritan dominion kx III Administrator's Manual

Appendix D: Specifications
382
If the Mac's HDMI or DisplayPort video has a mini connector, a passive
adapter cable may be required to connect to the full sized HDMI and
DisplayPort plugs on the digital CIMs.
Alternatively, use the Mac VGA adapter with the D2CIM-VUSB or
D2CIM-DVUSB. Note that this may be less reliable and the video quality
may suffer.
For information on established modes supported by the KX III 2.5.0 (and
later) for Mac, see Digital CIM Established and Standard Modes
page 382).

Digital CIM Timing Modes

Following are the default timing modes that are used when the KX III
communicates with a video source via a digital CIM.
The timing mode that is used is dependent on the native resolution of the
video source.

1024x768@60Hz

1152x864@60Hz

1280x720@60Hz

1280x960@60Hz

1280x1024@60Hz (default resolution applied to digital CIMs)

1360x768@60Hz

1400x1050@60Hz

1440x900@60Hz

1600x1200@60Hz

1680x1050@60Hz

1920x1080@60Hz

1920x1200@60Hz
See Configuring CIM Ports
information.
Digital CIM Established and Standard Modes
The following additional established and standard resolutions and timing
modes are supported by the KX III 3.0.0 (and later).
(on page 106) in online help for more
(on