Raritan dominion kx III Administrator's Manual page 81

VM access
Power control access
option Description
Deny Deny power control to the target server
Access Full permission to power control on a target server
For blade chassis, the port access permission will control access to the
URLs that have been configured for that blade chassis. The options are
Deny or Control. In addition, each blade housed within the chassis has
its own independent Port Permissions setting.
If you are using a tiered configuration in which a base KX III device is
used to access multiple other tiered devices, the tiered device enforces
individual port control levels. See
(on page 149) for more information on tiering.
Setting Permissions for an Individual Group
To set permissions for an individual user group:
1. Locate the group from among the groups listed. Individual groups
can be identified by the @ in the Group Name.
2. Click the Group Name. The Group page opens.
3. Select the appropriate permissions.
4. Click OK.
Group-Based IP ACL (Access Control List)
Important: Exercise caution when using group-based IP access control.
It is possible to be locked out of your KX III if your IP address is within a
range that has been denied access.
This feature limits a user's access to the KX III by allowing you to assign
them to a group that can only access the device through specific IP
addresses.
This feature applies only to users belonging to the specific group. This is
unlike the IP Access Control List feature that applies to all access
attempts to the device. IP access control takes priority over group-based
IP ACL and is processed first.
Important: The IP address 127.0.0.1 is used by the KX III Local Port and
cannot be blocked.
Chapter 4: KX III Administration
Configuring and Enabling Tiering
69