Virtual Kvm Client Java Requirements - Kx Iii; Proxy Server Configuration For Use With Vkc, Vkcs, And Akc - Raritan dominion kx III Administrator's Manual

Chapter 7: Virtual KVM Client (VKC and VKCs) Help

Virtual KVM Client Java Requirements - KX III

Proxy Server Configuration for Use with VKC, VKCS, and AKC

272
™
Java 1.7 or 1.8 is required to use the Java-based Virtual KVM Client
(VKC). Java 1.8.0_40 is required to use the VKCS.
When the use of a Proxy Server is required, a SOCKS proxy must also
be provided and configured on the remote client PC.
Note: If the installed proxy server is only capable of the HTTP proxy
protocol, you cannot connect.
To configure the SOCKS proxy:
1. On the remote client PC, select Control Panel > Internet Options.
a. On the Connections tab, click 'LAN settings'. The Local Area
Network (LAN) Settings dialog opens.
b. Select 'Use a proxy server for your LAN'.
c. Click Advanced. The Proxy Settings dialog opens.
d. Configure the proxy servers for all protocols.
IMPORTANT: Do not select 'Use the same proxy server for
all protocols'.
Note: The default port for a SOCKS proxy (1080) is different from
HTTP proxy (3128).
e. Click OK at each dialog to apply the settings.
2. Next, configure the proxy settings for the Java
a. Select Control Panel > Java.
b. On the General tab, click Network Settings. The Network
Settings dialog opens.
c. Select "Use Proxy Server".
d. Click Advanced. The Advanced Network Settings dialog opens.
e. Configure the proxy servers for all protocols.
IMPORTANT: Do not select 'Use the same proxy server for
all protocols'.
Note: The default port for a SOCKS proxy (1080) is different from
HTTP proxy (3128).
™
applets: