Cims Required For Dual Video Support - Raritan dominion kx III Administrator's Manual

Chapter 4: KX III Administration
242
Target operating Supported mouse
systems modes
®
Linux Intelligent and
Standard Mouse
Modes
®
Mac operating Single Mouse Mode
system

CIMs Required for Dual Video Support

The following CIMs support the dual video port feature:

D2CIM-VUSB

D2CIM-DVUSB

D2CIM-DVUSB-DVI

D2CIM-DVUSB-DP

D2CIM-DVUSB-HDMI

DCIM-USBG2
Review Digital CIM Target Server Timing and Video Resolution for
important information regarding digital CIMs. See
Interface Module (CIMs) Specifications
specifications.
If the original CIM attached to a primary or secondary video port is
disconnected and replaced with another CIM, the port is removed from
the dual port video group. If needed, re-add the port to the group.
Note: The CIM you use depends on your target server requirements.
Dual Port Video Group Usability Notes
Following are various functions that are affected when using the dual
port video group feature.

Client Launch Settings that are configured in the VKC, VKCS, and
AKC clients via Tools > Options > Client Launch Settings will be
applied to dual video port groups as follows:

Window Mode settings will be applied

Monitor settings will NOT be applied. Instead the Port Group
Management configured 'Display Orientation' will be applied.
Comments
®
Linux users may experience
display and mouse movement
issues using single mouse
mode. Raritan recommends
Linux users do not use Single
Mouse mode.
For Mac targets with multiple
monitors, use a standard
mouse in Single-Cursor mode.
Supported Computer
(on page 379) for CIM