Raritan dominion kx III Administrator's Manual page 61

3. Adjust for daylight savings time by checking the "Adjust for daylight
savings time" checkbox.
4. Choose the method to use to set the date and time:

User Specified Time - use this option to input the date and time
manually. For the User Specified Time option, enter the date and
time. For the time, use the hh:mm format (using a 24-hour clock).

Synchronize with NTP Server - use this option to synchronize the
date and time with the Network Time Protocol (NTP) Server.
For the Synchronize with NTP Server option:
 Enter the IP address of the Primary Time server.
 Enter the IP address of the Secondary Time server. Optional
Note: If DHCP is selected for the Network Settings on the Network
page, the NTP server IP address is automatically retrieved from the
DHCP server by default. Manually enter the NTP server IP address
by selecting the Override DHCP checkbox.
5. Click OK.
Create User Groups and Users
Note to CC-SG Users
When the KX III is controlled by CommandCenter Secure Gateway,
CC-SG authenticates users and groups, except for local users requiring
Local port access.
When CC-SG is controlling the KX III, local port users will be
authenticated against the local user database or the remote
authentication server (LDAP/LDAPS or RADIUS) configured on the KX III.
They will not be authenticated against the CC-SG user database.
For additional information about CC-SG authentication, see the
CommandCenter Secure Gateway User Guide, Administrator Guide,
or Deployment Guide, which can be downloaded from the Support
section of the Raritan website
Supported Protocols
To simplify management of usernames and passwords, the KX III
provides the ability to forward authentication requests to an external
authentication server. Two external authentication protocols are
supported: LDAP/LDAPS and RADIUS.
Chapter 4: KX III Administration
http://www.raritan.com.
49