Accessing The Kx Iii Using Cli - Raritan dominion kx III Administrator's Manual

Accessing the KX III Using CLI

Access the KX III by using one of the following methods:

SSH (Secure Shell) via IP connection
A number of SSH clients are available and can be obtained from the
following locations:

Putty - http://www.chiark.greenend.org.uk/~sgtatham/putty/
http://www.chiark.greenend.org.uk/~sgtatham/putty/

SSH Client from ssh.com -

Applet SSH Client -
http://www.netspace.org/ssh

OpenSSH Client -
SSH Connection to the KX III
Use any SSH client that supports SSHv2 to connect to the KX III. You
must enable SSH access from the Devices Services page.
Note: For security reasons, SSH V1 connections are not supported by
the KX III.
SSH Access from a Windows PC
To open an SSH session from a Windows
1. Launch the SSH client software.
2. Enter the IP address of the KX III server. For example,
192.168.0.192.
3. Choose SSH, which uses the default configuration port 22.
4. Click Open.
The login as: prompt appears.
See Logging In (on page 234).
SSH Access from a UNIX/Linux Workstation
To open an SSH session from a UNIX
1. Log in as the user admin, enter the following command:
ssh -l admin 192.168.30.222
Enter your password when the Password prompt appears.
See Logging In (on page 234).
www.ssh.com http://www.ssh.com
www.netspace.org/ssh
www.openssh.org http://www.openssh.org
® /Linux
Chapter 4: KX III Administration
®
PC:
® workstation:
233