Audio - Raritan dominion kx III Administrator's Manual

Audio

Audio Playback and Capture Issues
Features that May Interrupt an Audio Connection
If you use any of the following features while connected to an audio
device, your audio connection may be interrupted. Raritan recommends
you do not use these features if you are connected to an audio device:

Video Auto-Sense

Extensive use of the local port

Adding users
Issues when Using a Capture Device and Playback Device
Simultaneously on a Target
On some targets, the simultaneous connection of capture devices and
playback devices may not work due to the USB hub controller and how it
manages the USB ports. Consider selecting an audio format that
requires less bandwidth.
If this does not resolve the issue, connect the D2CIM-DVUSB CIM's
keyboard and mouse connector to a different port on the target. If this
does not solve the problem, connect the device to a USB hub and
connect the hub to the target.
Audio in a Linux Environment
The following are known issues when using the audio feature in a Linux
environment.

®
Linux users, use the default audio device for playback. Sound may
not come through if a non-default sound card is selected.

SuSE 11 clients require Javas_1_6_0-sun-alsa (ALSA support for
java-1_6_0-sun) to be installed via YAST.

® headsets with a built in a mic, only the Mono Capture
For Logitech
option is available.

In order to display the device, if you are running SUSE 11 and an
ALSA driver, log out of KX III, then log back in.
Additionally, if you connect and disconnect the audio device a
number of times, the device may be listed several times vs. just once
as it should.

Using the audio feature with a Fedora Core
16 bit, 44k may cause considerable interference during playback.
Appendix E: Informational Notes
® 13 target set to mono
®
415