Raritan dominion kx III Administrator's Manual page 47

Windows XP, Windows 2003, Windows 2008 Mouse Settings
Configure these mouse settings in Windows XP
2003 ® and Windows 2008
Configure the Motion settings:

Set the mouse motion speed setting to exactly the middle speed

Disable the "Enhance pointer precision" option

Disable the Snap To option
Disable transition effects:

Deselect the "Use the following transition effect for menus and
tooltips" option
Windows 2000 Mouse Settings
Configure these Windows 2000
Configure the Motion settings:

Set the acceleration to None

Set the mouse motion speed setting to exactly the middle speed
Disable transition effects:

Deselect the "Use the following transition effect for menus and
tooltips" option
Apple Mac Mouse Settings
Configure these Apple Mac
Absolute Mouse Synchronization is required for proper mouse
synchronization on KVM target servers running a Mac
In order for Absolute Mouse Synchronization to work, a virtual media
CIM is required. For a list of supported CIMs, see
Interface Module (CIMs) Specifications
Once you have completed your KX III installation, set the Mac USB
profile. If you do not set this profile, the mouse does synch in OS X.
To do this, do one of the following:
1. Connect to the Mac target from the Raritan KVM Client.
2. Select USB Profile > Other Profiles > Mac OS-X (10.4.9 and later).
Or
3. In KX III, select Device Settings > Port Configuration, then click on
the target name to open the Port page.
4. Expand 'Select USB Profiles for Port' section.
Chapter 4: KX III Administration
® :
®
mouse settings:
®
mouse settings:
Supported Computer
(on page 379).
®
, Windows
®
operating system.
35