Raritan dominion kx III Administrator's Manual page 119

3. Next -

Configure the CIM Settings

Configure the CIM Power Associations

Configure the CIM Target Settings

Apply Selected Profiles to Other CIMs

Apply a Native Display Resolution to Other CIMs
109)
Configure the CIM Settings
1. Select Standard KVM Port as the subtype for the port.
2. Assign a name to identify the server connected to that port. The
name can be up to 32 characters, and alphanumeric and special
characters are allowed.
Configure the CIM Power Associations
1. In the Power Association section, associate a power strip with the
port, if needed.
Configure the CIM Target Settings
1. In the Target Settings section, select "640x480 or 720x400
Compensation" if you are experiencing display issues when the
target is using this resolution.
2. In the Target Settings section, select "Video Offset Compensation" if
the video appears off center on your target.
Chapter 4: KX III Administration
(on page 107)
(on page 107)
(on page 107)
(on page 108)
(on page
107