Raritan dominion kx III Administrator's Manual page 117

7. In the KVM Switch Name field, enter the name you want to use to
refer to this port connection.
8. Activate the targets that the KVM switch hot key sequence will be
applied to.
Indicate that the KVM switch ports have targets attached by selecting
'Active' for each of the ports. Use Select All and Deselect All to select
and deselect the Active checkboxes accordingly.
Change the port names as need.
9. In the KVM Managed Links section of the page, you are able to
configure the connection to a web browser interface, if one is
available.
a. Select Active to activate the link once it is entered.
Leave the checkbox deselected to keep the link inactive.
You can enter information into the link fields and save without
activating the links.
Once Active is selected, the URL field is required.
The username, password, username field and password field are
optional depending on whether single sign-on is desired or not.
b. URL Name - Enter the URL to the interface.
c. Username - Enter the username used to access the interface.
d. Password - Enter the password used to access the interface.
Chapter 4: KX III Administration
105