Mounting Cd-Rom/Dvd-Rom/Iso Images - Raritan dominion kx III Administrator's Manual

Chapter 5: Virtual Media
262
2. Choose the drive from the Local Drive drop-down list.
If you want Read and Write capabilities, select the Read-Write
checkbox.
This option is disabled for nonremovable drives. See the
when Read/Write is Not Available
information.
When checked, you will be able to read or write to the connected
USB disk.
WARNING: Enabling Read/Write access can be dangerous!
Simultaneous access to the same drive from more than one entity
can result in data corruption. If you do not require Write access,
leave this option unselected.
3. Click OK. The media will be mounted on the target server virtually.
You can access the media just like any other drive.

Mounting CD-ROM/DVD-ROM/ISO Images

This option mounts CD-ROM, DVD-ROM, and ISO images.
Note: ISO9660 format is the standard supported by Raritan. However,
other CD-ROM extensions may also work.
To access a CD-ROM, DVD-ROM, or ISO image:
1. From the KVM client, choose Virtual Media > Connect CD-ROM/ISO
Image, or click the Connect CD ROM/ISO button
Virtual Media CD/ISO Image dialog appears.
2. For internal and external CD-ROM or DVD-ROM drives:
a. Choose the Local CD/DVD Drive option.
b. Choose the drive from the Local CD/DVD Drive drop-down list.
All available internal and external CD and DVD drive names will
be populated in the drop-down list.
c. Click Connect.
3. For ISO images:
a. Choose the ISO Image option. Use this option when you want to
access a disk image of a CD, DVD, or hard drive. ISO format is
the only format supported.
b. Click Browse.
c. Navigate to the path containing the disk image you want to use
and click Open. The path is populated in the Image Path field.
d. Click Connect.
Conditions
(on page 260) for more
. The Map