Raritan dominion kx III Administrator's Manual page 187

Trap Name
ipConflictResolved
networkFailure
networkParameterChanged
passwordSettingsChanged
portConnect
portConnectionDenied
portDisconnect
portStatusChange
powerNotification
powerOutletNotification
rebootCompleted
rebootStarted
scanStarted
scanStopped
securityBannerAction
securityBannerChanged
securityViolation
setDateTime
setFIPSMode
startCCManagement
stopCCManagement
userAdded
userAuthenticationFailure
userConnectionLost
Chapter 4: KX III Administration
Description
An IP Address conflict was resolved.
An Ethernet interface of the product can no
longer communicate over the network.
A change has been made to the network
parameters.
Strong password settings have changed.
A previously authenticated user has begun a
KVM session.
A connection to the target port was denied.
A user engaging in a KVM session closes the
session properly.
The port has become unavailable.
The power outlet status notification: 1=Active,
0=Inactive.
Power strip device outlet status notification.
The KX III has completed its reboot.
The KX III has begun to reboot, either through
cycling power to the system or by a warm reboot
from the OS.
A target server scan has started.
A target server scan has stopped.
Security banner was accepted or rejected.
A change has been made to the security banner.
Security violation.
The date and time for the device has been set.
FIPS mode has been enabled.
The device has been put under CommandCenter
Management.
The device has been removed from
CommandCenter Management.
A user has been added to the system.
A user attempted to log in without a correct
username and/or password.
A user with an active session has experienced
an abnormal session termination.
175