Raritan dominion kx III Administrator's Manual page 182

Chapter 4: KX III Administration
Steps
In VKC, click Connection > Properties to open the Connection Properties dialog.
Set the Video Mode to "Greyscale 2" so you use the least bandwidth.
17
Click OK.
It may be necessary to set the "Noise Filter" to greater than 2 if the modem connection is
slow after you test it.
170
Configuring Date/Time Settings
Use the Date/Time Settings page to specify the date and time for the KX
III. There are two ways to do this:

Manually set the date and time.

Synchronize the date and time with a Network Time Protocol (NTP)
server.
To set the date and time:
1. Choose Device Settings > Date/Time. The Date/Time Settings page
opens.
2. Choose your time zone from the Time Zone drop-down list.
3. Adjust for daylight savings time by checking the "Adjust for daylight
savings time" checkbox.
4. Choose the method to use to set the date and time:

User Specified Time - use this option to input the date and time
manually. For the User Specified Time option, enter the date and
time. For the time, use the hh:mm format (using a 24-hour clock).

Synchronize with NTP Server - use this option to synchronize the
date and time with the Network Time Protocol (NTP) Server.
5. For the Synchronize with NTP Server option:
a. Enter the IP address of the Primary Time server.
b. Enter the IP address of the Secondary Time server. Optional