Select the Local Port Connect Key
Select the Local Port Connect key. Use a connect key sequence to
connect to a target and switch to another target without returning to the
GUI.
Then use the hot key to disconnect and return to the local port GUI
Once the local port connect key is created, it will appear in the
Navigation panel of the GUI so you can use it as a reference. See
Connect Key Examples
sequences.
The connect key works for both standard servers and blade chassis.
Configure the Power Save Feature (Optional)
1. If you would like to use the power save feature:
a. Select the Power Save Mode checkbox.
b. Set the amount of time (in minutes) in which Power Save Mode
will be initiated.
Chapter 4: KX III Administration
(on page 343) for examples of connect key
231