Stopping Cc-Sg Management - Raritan Dominion KX II-101-V2 User Manual

Stopping CC-SG Management

2. Click Reboot. You are prompted to confirm the action. Click Yes to
proceed with the reboot.
While the KX II-101-V2 is under CC-SG management, if you try to
access the device directly, you are notified that it the device is under CC-
SG management.
If you are managing the KX II-101-V2 through CC-SG and connectivity
between CC-SG and the KX II-101-V2 is lost after the specified timeout
interval (typically 10 minutes), you are able to end the CC-SG
management session from the KX II-101-V2 console.
Note: You must have the appropriate permissions to end CC-SG
management of the KX II-101-V2. Additionally, the Stop CC-SG
Management option will not be provided unless you are currently using
CC-SG to manage the KX II-101-V2.
To stop CC-SG management of the KX II-101-V2:
1. Click Maintenance > Stop CC-SG Management. A message
indicating that the device is being managed by CC-SG will be
displayed. An option to remove the device from CC-SG management
will also be displayed.
Chapter 9: Maintenance
153