Dell Chassis Cable Lengths And Video Resolutions - Raritan dominion kx III Administrator's Manual

Hide thumbs Also See for dominion kx III:
Table of Contents

Advertisement

Legend:
Does not function as expected
Supported
Functions; not recommended
NOT supported by Ethernet specification; product will
communicate, but collisions will occur
Per Ethernet specification, these should be "no
communication," however, note that the KX III behavior
deviates from expected behavior
Note: For reliable network communication, configure the KX III and the
LAN switch to the same LAN Interface Speed and Duplex. For example,
configure the KX III and LAN Switch to Autodetect (recommended), or
set both to a fixed speed/duplex such as 100MB/s/Full.

Dell Chassis Cable Lengths and Video Resolutions

In order to maintain video quality, Raritan recommends using the
following cable lengths and video resolutions when you are connecting to
®
Dell
blade chassis from the KX III:
Video resolution
1024x768@60Hz
1280x1024@60Hz
1600x1200@60Hz
Smart Card Minimum System Requirements
Local Port Requirements
The basic interoperability requirement for local port attachment to the KX
III is:
All devices (smart card reader or token) that are locally attached
must be USB CCID-compliant.
Cable length
50' (15.24 m)
50' (15.24 m)
30' (9.14 m)
Appendix D: Specifications
385

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents