Resetting The Kx Iii Using The Reset Button On The Device - Raritan dominion kx III Administrator's Manual

Resetting the KX III Using the Reset Button on the Device

On the back panel of the device, there is a Reset button. It is recessed to
prevent accidental resets (you need a pointed object to press this
button).
The actions that are performed when the Reset button is pressed are
defined on the Encryption & Share page. See
page 198).
Note: It is recommended that you save the audit log prior to performing a
factory reset.
The audit log is deleted when a factory reset is performed and the reset
event is not logged in the audit log. For more information about saving
the audit log, see Audit Log (on page 210).
To reset the device:
1. Power off the KX III.
2. Use a pointed object to press and hold the Reset button.
3. While continuing to hold the Reset button, power the KX III device
back on.
4. Continue holding the Reset button for 10 seconds.
Chapter 11: KX III Local Console
Encryption & Share (on
353