Raritan dominion kx III Administrator's Manual page 368

Appendix A: Connecting a KX III and Cat5 Reach DVI - Provide Extended Local Port Functionality
356
5. Turn on the KVM switch.
Tip: The local or remote console can be equipped with a KVM drawer
instead of a set of keyboard, mouse and monitor. See the illustration
below.
To increase the distance between two tiered KVM switches:
1. Set up a remote console by connecting the receiver to a KVM switch.
a. Connect a USB CIM to the receiver.
b. Connect this USB CIM to any channel port on the KVM switch
via a Cat5 cable.
2. Use a Cat5e/6 cable to connect the transmitter and receiver.
3. Connect the transmitter and receiver to an appropriate power source
respectively.
4. Connect the KVM switch to the transmitter.