Raritan dominion kx III Administrator's Manual page 114

Chapter 4: KX III Administration
102
Port Name
If a KX III port has no CIM connected or is connected to a CIM with no
name, a default port name of Dominion_KX3_Port# is assigned to the
port. Dominion_KX3 is the device model and Port# is the number of the
KX III physical port.
When a CIM is attached to the KX III, the CIM name will be used for the
port.
To rename a port with a status of Not Available, do one of the following:

Rename the port, and select 'Persist name on Next CIM Insertion'.
When a CIM is attached, the name that has been assigned will be
copied into the CIM.

Reset the port, including the name, to factory defaults by selecting
'Reset to Defaults'. When a CIM is attached, the CIM name will be
used.
Note: Do not use apostrophes for the Port (CIM) Name.
After you have renamed the port, use the Reset to Default function at
any time to return it to its default port name.
When you reset a port name to its default, any existing power
associations are removed and, if the port is a part of a port group, it is
removed from the group.