Raritan dominion kx III Administrator's Manual page 57

12. Select "Use the Following DNS Server Addresses" and enter the
Primary DNS Server IP Address and Secondary DNS Server IP
Address. The secondary addresse is used if the primary DNS server
connection is lost due to an outage.
Note: "Obtain DNS Server Address Automatically" and "Preferred
DHCP Host Name" are only enabled when KX III is configured in
DHCP mode
13. When finished, click OK.
Your KX III device is now accessible via the LAN1 IP address and
the LAN2 IP address.
Name Your Target Servers
Connect all of the target servers if you have not already done so.
Select Device Settings > Port Configuration, then click the Port Name of
the target server you want to name.
1. Enter a name for the server up to 32 alphanumeric and special
characters. Click OK.
Chapter 4: KX III Administration
45