Supported Paragon Ii Cims And Configurations - Raritan dominion kx III Administrator's Manual

Supported Paragon II CIMS and Configurations

When you access the Paragon II system from KX III or CC-SG (if the KX
III is managed by CC-SG), the Paragon II OSUI login screen appears for
you to log in.
In this integration, you can perform any OSUI functions implemented with
current Paragon II firmware or any KX III function implemented with
current KX III firmware except for the virtual media feature.
When accessing the Paragon II OSUI through KX III, DO NOT attempt to
synchronize the mouse manually. A mouse is not necessary on the OSUI
screen and mouse synchronization will delay the keyboard response for
seconds.
See Supported Paragon II CIMS and Configurations
additional information.
The KX III supports the P2CIM-APS2DUAL and P2CIM-AUSBDUAL
CIMs, which provide two RJ45 connections to different KVM switches.
Support of these CIMs provides a second path to access the target in the
event that one of the KVM switches is blocked or fails.
Paragon CIM Supports

P2CIM-APS2DUAL



Appendix B: Accessing a Paragon II from the KX III
®
Servers with IBM
PS/2-type keyboard
and mouse ports
Automatic skew
compensation (when
the CIMs are
connected to
Paragon II, not from a
KX III)
Intelligent Mouse
mode
Standard Mouse
mode
(on page 359) for
Does not support

Virtual media

Smart cards

Absolute Mouse
mode

Use with blade
chassis

Cascaded KVM
configurations
359