Dual Power Supplies; Intelligent Power Distribution Unit (Pdu) Control - Raritan dominion kx III Administrator's Manual

Appendix F: Frequently Asked Questions
Question
What is the extended local port?

Dual Power Supplies

Question
Does Dominion KX III have a dual
power option?
Does the power supply used by
Dominion KX III automatically
detect voltage settings?
If a power supply or input fails, will
I be notified?

Intelligent Power Distribution Unit (PDU) Control

Question
What type of remote power control
capabilities does Dominion KX III
offer?
436
Answer
The Dominion KX2-808, KX2-832 and KX2-864
featured an extended local port. The
corresponding Dominion KX III models do not
have an extended local port. Instead all KX III
models have a tiering port.
To extend the KX III's digital local port, you can
use the Raritan Cat5 Reach DVI product for
local and remote access up to 500 meters.
See Connecting a KX III and Cat5 Reach DVI
- Provide Extended Local Port Functionality
(on page 354)
Answer
Yes. All Dominion KX III models come equipped
with dual AC inputs and power supplies with
automatic failover. Should one of the power
inputs or power supplies fail, then the KX III will
automatically switch to the other.
Yes. Dominion KX III's power supply can be
used in AC voltage ranges from 100–240 volts,
at 50–60 Hz.
The Dominion KX III front panel LED will notify
the user of a power failure. An entry will also be
sent to the audit log and displayed on the KX
remote client user interface. If configured by the
administrator, then SNMP or syslog events will
be generated.
Answer
Raritan's intelligent PDUs can be connected to
the Dominion KX III to provide power control of
target servers and other equipment. For
servers, after a simple one-time configuration
step, just click on the server name to power on,
off or to recycle a hung server.