Add A Captive Portal Instance - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
disconnects any active TCP or SSL connection with the client. The valid range is 60 to
600 seconds. The default authentication time-out is 300 seconds.
Click the Apply button.
10.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Table 209. Captive Portal Global Configuration
Field
Operational Status
Disabled Reason
CP IP Address
Supported Captive Portals
Configured Captive Portals
Active Captive Portals
System Supported Users
Local Supported Users
Configured Local Users
Authenticated Users

Add a Captive Portal Instance

By default, the switch has one captive portal. You can change the settings for that captive
portal, and you can also create and configure up to nine additional portals.

To add a captive portal instance:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Description
The operational status of the captive portal feature, which is either
Enabled or Disabled. The default is Disabled.
If CP is disabled, this field displays the reason, which can be one of the
following:
Administratively disabled
•
IP address not configured
•
No IP routing interface
•
Routing disabled
•
The IP address that the captive portal uses.
The number of supported captive portals in the system.
Shows the number of captive portals configured on the switch.
Shows the number of captive portal instances that are operationally
enabled.
Shows the number of authenticated users that the system can support.
Shows the number of entries that the local user database supports.
The number of local users configured.
Shows the number of users currently authenticated to all captive portal
instances on this switch.
Manage Device Security
577