Table of Contents
Advertisement
Feature
Printing: Continue
TONER SUPPLY LOW
printing with toner
supply low
Program button
PROGRAM KEY REG.
Restricting use:
RESTRICTIVE
DACs, user access
CODES
Sending Settings
Feature
Batch sending
BATCH TX
Dialling time out
TIME OUT
ECM sending
ECM TX
14-4
Summary of Important Settings
Setting Name
When the toner supply runs low, the unit
saves the remainder of the document in
memory. You can set the unit to continue
printing even after the toner runs low during
printing. (1 p. 14-23)
The Program button is set to function as the M
button*. This button can be programmed for
other functions. (1 pp. 10-12, 14-12)
No password or access codes are set on the unit
to restrict sending documents, printing, or
making telephone calls. All these functions can
be restricted. (1 p. 14-32)
* UK only. The default for all other countries is printing a TX report.
Setting Name
If several documents for the same destination
are stored in memory for delayed sending,
when the timer goes off for one of the
documents, all other documents for the same
destination are sent together in the same
transmission, regardless of their time setting.
(1 p. 14-38)
The unit automatically pauses five seconds after
you press a speed dialling button to allow you
to dial other numbers for sequential
broadcasting. You can turn the time-out feature
off. (1 p. 14-18)
The unit is set to conduct all transmissions
using ECM (Error Correction Mode). If
transmission speed appears to be extremely
slow, you may be able to speed up transmission
time by turning ECM off. (1 p. 14-18)
Default Description
Default Description
Chapter 14
Advertisement
Table of Contents
