If you selected 06 TX STAMP in step 7 (on p. 14-42):
Set
8.
Press Set.
SELECT AN ITEM
Use the search buttons (d, u) to set the default for the TX stamp
9.
feature.
Set
10. Press Set to register your setting.
11. Press Stop to return to standby mode.
Stop
Implementing Copy Default Settings
The copy default settings are implemented when
you press the COPY button to switch to copy mode,
you press the Stop or Reset button in copy mode (but not while
copying is in progress),
the autoclear feature is activated in copy mode, or
the registration/setting operation is complete.
14-46
Summary of Important Settings
TX STAMP
You can select OFF or ON.
01 TX STAMP OFF
02 TX STAMP ON
Chapter 14