Turning The Stamp Feature On And Off; Setting Up The Stamp Feature - Olivetti Copia 9916 User Manual

Turning the Stamp Feature On and Off

Before sending a document, turn the stamp feature on or off as described
below:
Stamp
To turn the stamp feature on, press the Stamp button to light the lamp.
Stamp To turn the stamp feature off, press the Stamp button to turn the lamp off.
n
The stamp feature lamp turns itself off automatically after the auto
clear time elapses.
If the stamp becomes faint, you may have to refill the stamp ink
compartment. (1 p. 4-15)

Setting Up the Stamp Feature

You can select whether you want your documents stamped when you
scan a document for direct, manual, and memory sending, or only for
direct and manual sending. Follow the steps below to set this option.
1. Press Data Registration.
Data Registration
SELECT AN ITEM
Set
2. Press Set.
SELECT AN ITEM
Chapter 4
REGISTRATION/SETTING
DATA REGISTRATION
01 DATA REGISTRATION
02 TEL# REGISTRATION
01 USER SETTINGS
02 REPORT SETTINGS
03 TX SETTINGS
04 RX SETTINGS
05 PRINTER SETTINGS
Sending Documents
4-13