Table of Contents
Advertisement
Feature
Pause length
PAUSE TIME
Redialling
AUTO REDIAL
Transmission error:
ERASE FAILED TX
document in memory
Speed
TX START SPEED
Stamp
TX STAMP
*** Two seconds in Australia, Singapore, Ireland, New Zealand, and Malaysia
*** 1-15 seconds for Australia, Singapore, Ireland, New Zealand, and Malaysia
*** Six minutes in New Zealand
Chapter 14
Setting Name
A pause entered within a number is set for four
seconds*. You can lengthen this pause from 4 to
11 seconds**. A pause entered at the end of a
number is fixed at 10 seconds and cannot be
adjusted. (1 pp. 3-3, 14-18)
If the other party's line is busy, the unit is set to
perform two redialling attempts at two
minute*** intervals. You can increase the
number of redial attempts and the length of the
interval between attempts. If an error occurs
during redialling, the unit is set to resend the
first page of the document and the pages from
where the error occurred. (1 pp. 4-38, 14-18)
If a transmission error occurs, the document
remains in memory. You can set the unit to
erase the document from memory if an error
occurs during transmission. (1 p. 14-18)
The starting speed for sending is set to
33600 bps. Slower settings are available.
(1 p. 14-33)
The unit stamps documents sent using direct
and memory sending.
(1 pp. 4-12, 14-18)
Default Description
Summary of Important Settings
14-5
Advertisement
Table of Contents
