Olivetti Copia 9916 User Manual page 395

Hide thumbs Also See for Copia 9916:
Table of Contents

Advertisement

RX Report (1 p. 12-10)
This report can be printed every time a document is received.
Relay Broadcast Report
This report is sent from a relay unit to the originator, after the documents
have been relayed by the relay unit.
Speed Dial Lists
1-Touch List (1 p. 3-61)
This list prints the standard list (List 1) of all the one-touch speed
dialling buttons registered with numbers.
Coded Dial List (1 p. 3-61)
This list prints the standard list (List 1) of all the coded speed dialling
codes registered with numbers.
1-Touch (Detail) (1 p. 3-61)
This list prints a detailed list (List 2) of all the one-touch speed
dialling buttons registered with numbers.
Coded (Detail) (1 p. 3-62)
This list prints a detailed list (List 2) of all the coded speed dialling
codes registered with numbers.
Group Dial List (1 p. 3-62)
This list prints a list of groups registered under one-touch speed
dialling buttons and coded speed dialling codes.
Transmission (TX) Reports
Error TX Report (1 p. 12-7)
This report prints every time an error occurs during sending.
Transmission (TX) Report (1 p. 12-7)
This report can be printed every time a document is sent.
TX Report with First Page (1 p. 12-8)
This report can be printed as a reminder of the contents of the
document, when using memory sending.
User's Data List
This list is used to check if the settings, sender information and sender
names are set correctly.
Chapter 12
(1 p. 12-9)
(1 pp. 2-33, 14-54)
12-3
Reports and Lists

Advertisement

Table of Contents
loading

Table of Contents