8.
Press Set.
Set
If you have set the document on the platen glass, follow steps
6 to 8 on page 4-27, then press Set.
The unit begins to scan the document into memory.
The document is stored in the memory box and will be
handled according to the memory box settings. (1 p. 6-23)
If you want to cancel transmission before the preset sending
time is reached, you can use the Fax Monitor button. (1 p. 4-56)
Keep a record of the TX/RX number in case you need to
cancel transmission.
6-39
Chapter 6
Using the Memory Features